DOOLEYS HIFI


THE NORTH WEST'S LEADING MUSICAL FIDELITY SPECIALIST

Stacks Image 60

Silver 200


£1000 a pair*


what HiFi_awards_2017


The Silver 200’s sleek appearance makes it a truly compact and attractive floorstander, blending audiophile performance with lifestyle proportions. A pair of Monitor Audio’s unique 5¼-inch C-CAM bass drivers share the duties of delivering bass and mid/bass. Configured as a two-and-a-half way system both electrically and acoustically, you will be amazed at the magical sound quality that this slimline can produce in your home.

The two bass drivers operate in separate acoustic chambers within the enclosure to provide differential tuning and are divided optimally with crossovers to ensure both bass drivers contribute to the lower frequencies. This ensures only the mid-range crosses over with the tweeter and results in a consistent and precise image, on and off axis. This configuration delivers performance approaching a three-way design whilst ensuring higher efficiency and extended low frequency, yet in a smaller cabinet.

The drive units are constructed with massive magnetic systems capable of deep bass extension. The low-frequency response has been engineered to provide smooth roll-off without exhibiting any of the usual ‘overhang’, meaning that the Silver 200 can be sited close to a wall and provide the ideal blend of domesticity and blazing performance. Diminutive for a floorstander, this model is no slouch. The Silver 200 is a serious audiophile speaker with amazing drive and incredible musicality. The engineering challenge was to create a smaller box with bigger sound; with the Silver 200, Monitor Audio achieves that goal so that you can enjoy your music and films with convincing realism.

Selected, premium-quality wood veneers and contemporary Satin White finishes.
*High Gloss Black + 10% premium

System Format
21/2-way

Frequency Response (-6 dB)
38 Hz – 35 kHz

Sensitivity (1W@1M)
89 dB

Nominal Impedance
8 ohms

Minimum Impedance
4.7 ohms @ 182 Hz

Maximum SPL
114 dBA (pair)

Power Handling (RMS)
150 W

Recommended Amplifier Requirements
60 – 150 W

Bass Alignment
Dual chamber bass reflex with differential tuning. Twin HiVe II port system

Crossover Frequency
LF: 700 Hz
MF/HF: 2.9 kHz

Drive Unit Complement
1 x 51/4-inch RST bass driver 1 x 51/4-inch RST bass/mid driver
1 x 1-inch (25 mm) Gold Dome C-CAM tweeter

Cabinet Dimensions (excluding grille and terminals)
885 x 165 x 240 mm
3413/16 x 61/2 x 97/16-inch

External Dimensions (including grille and terminals)
885 x 165 x 269 mm
3413/16 x 61/2 x 109/16-inch

External Dimensions (including out-rigger plates, feet and spikes)
918 x 232 x 307 mm
361/8 x 91/8 x 121/16-inch

Weight (each)
14.6 kg
Silver200_LS_Walnut_chair720
Two-and-a-half-way, three-driver configuration
Differentially-tuned acoustic system means high efficiency with powerful low-frequency extension
New 25 mm C-CAM, (Ceramic-Coated Aluminium/Magnesium) tweeter featuring vented Neo magnet system optimised for lower distortion and cleaner sounding highs
New 5¼-inch bass and 5¼-inch bass/mid drivers with ‘dished’ C-CAM cone profile for better damping and improved mid-range clarity
RST Cone profile for improved diaphragm rigidity and lower distortion
Unique-build ring/voice coil-cone coupling mechanism (DCF) optimised to reduce high-frequency cone break-up and increasing the critical voice coil circumferential rigidity
Cast polymer driver chassis design for improved rigidity and damping characteristics
HiVe II port technology means better transient response and tighter bass, due to smoother airflow
Pureflow silver-plated OFC copper internal cabling for the highest quality transfer through the signal chain
High-quality crossovers utilising premium grade, bespoke polypropylene film capacitors, air-core and low-loss laminated steel-core inductors results in maximum signal transfer
Rigid 20 mm MDF construction utilising scientifically optimised cabinet bracing
Single bolt-through driver technology providing increased bracing strength, rigidity and driver/baffle de-coupling
Ultra low-profile grilles featuring invisible magnetic grille fixings for clean visual styling when fitted
High-quality crossovers with premium-grade polypropylene film capacitors throughout
Bespoke, high quality bi-wire terminals
Terminal panel located at floor level for easy termination and neat cable access
Out-rigger feet (spiked, or rubber for hard flooring) provide attractive appearance while taking up less floor space
Selected, premium-quality wood veneers, high gloss lacquer and contemporary Satin White finishes.