DALI RUBICON LCR
DALI's New LCR loudspeaker is a bit of a surprise to any one who happens to hear this wall mounting loudspeaker, setup as a stereo pair without a subwoofer, it has bass were other similar loudspeakers have none, thanks to it's clever twin rear ports that use the wall to extend the bass from the loudspeaker, couple that with the hybrid tweeter arrangement and you have another speaker which can easily be used in a stereo configuration ...... a fantastic find!
Left/Centre/Right or Rear Surrounds an extremely versatile loudspeaker.
The cone used in the RUBICON series draws upon the heritage from the EPICON technologies, and has a light, rigid and randomly uneven structure. This lower the complexity of the central part of the motor, ensures even piston like movements, reduces the possibility of surface resonance greatly and creates an extremely low distortion within the RUBICON series. The soft low-loss rubber surround is designed and bespoke specifically for the RUBICON series, and all of the components are situated in an aluminum chassis designed for maximum airflow around the cone and magnet system.
In the RUBICON series, DALI makes use of both the soft dome tweeter working alone, and the hybrid tweeter configuration an amazing rendering of the high frequencies. The voice coil used in the RUBICON series is designed to be very light and agile in order to achieve a broader bandwidth. This lighter voice coil is placed inside a powerful ferrite magnet that keeps a tight control of its movements. The ribbon tweeter is the master of wide dispersion and combining it with the soft dome, the tweeter module starts working as low as 2.5 KHz. This extreme bandwidth combined with the ultra wide dispersion is an important part of the DALI sound philosophy.
RUBICON LCR Specifications
|Frequency Range (+/-3 dB) [Hz]||59 - 34.000|
|Sensitivity (2,83 V/1 m) [dB]||89.0|
|Nominal Impedance [Ω]||4|
|Maximum SPL [dB]||109|
|Recommended Amplifier Power [W]||20 - 150|
|Crossover Frequency [Hz]||3,100/ 14,000|
|Crossover Principle||2 + ½-way|
|High Frequency Drivers||1 x 17 x 45 mm Ribbon|
1 x 29 mm Soft Textile Dome
|Low Frequency Driver||1 x 6½" Wood Fibre Cone|
|Enclosure Type||Bass Reflex|
|Bass Reflex Tuning Frequency [Hz]||49,0|
|Connection input(s)||Single Wire|
|Recommended Placement||Above/Below TV Screen|
|Recommended Distance From Wall [cm]||0 - 30|
|Dimensions With Base (HxWxD) [mm]||468 x 278 x 146|
Micro Fibre Cloth
|Finish||Black High Gloss Lacquer|
White High Gloss Lacquer
Not available yet
None available yet