In audio history terms, Q Acoustics is a relatively young company but their achievements have far exceeded their fledgling years. Formed by experts in the audio industry, they tasked themselves with making the best affordable loudspeakers in the world, recruiting world class acoustics engineers and industrial designers to make this a reality.
Since the introduction of the 1000 stereo and home cinema loudspeaker series in 2006, the company has continued to build on the success of this foundational and award-winning range, producing series after series of innovative, leading-edge and best-selling passive, wireless and home cinema loudspeakers.
Q Acoustics 3000i and 5000 series are available at Dooleys-HiFi
Q Acoustics 3010i
£239.00 pair
Finishes: White, Graphite, Black and Walnut
The Q 3010i is a slim-line bookshelf or stand mount speaker from Q Acoustics core loudspeaker offering, designed to deliver beautiful sound into your home, from a compact cabinet design
Key Features
Slim-line & versatile design to shelf or stand mount to fit seamlessly into your chosen listening room
25% larger cabinet than its predecessor delivering a larger scale sound and deeper bass
P2P™ bracing – helps keep the enclosure extra quiet through computer aided placement of internal bracing
Uses a 22mm decoupled High Frequency Driver with wide surround creating a wide even dispersion of stereo image
Low Profile Terminals - recessed cut-out reduces cabinet noise and allows them to be close proximity to rear walls
New low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs.
Specification
Enclosure type: 2-way reflex
Bass Unit: 100 mm (4 in)
Treble Unit: 22 mm (0.9 in)
Frequency Response (+3 dB, -6 dB): 65 Hz – 30 kHz
Nominal Impedance: 6 Ω
Minimum Impedance: 4 Ω
Sensitivity (2.83 Vrms@1 m): 86 dB
Stereo Amplifier Power: 15 - 75w
AV Receiver (2 ch. driven): 50 - 125 W
Crossover Frequency: 2.6kHz
Effective Volume: 4.0 L (244 cu in)
Dimensions H/W/D: 253 x 150 x 252 mm (10.0 x 5.9 x 10 in)
Weight (per speaker): 4.1 kg (9.0 lbs)
Q Acoustics 3020i
£299.00 pair
Finishes: White, Graphite, Black and Walnut
The Q 3020i is a bookshelf or stand mount speaker from Q Acoustics core loudspeaker offering, designed to deliver beautiful sound into your home, using the latest technological enhancements applied to the full 3000i series.
Key Features
25% increased cabinet volume from previous models delivering a larger scale sound and deeper bass
P2P™ bracing – helps keep the enclosure extra quiet through computer aided placement of internal bracing
Uses a 22mm decoupled High Frequency Driver with wide surround creating a wide even dispersion of stereo
Low profile terminals - recessed cut-out reduces cabinet noise and allows them to be used near to rear wall
New low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs.
Specification
Enclosure type: 2-way reflex
Bass Unit: 125 mm (5 in)
Treble Unit: 22 mm (0.9 in)
Frequency Response (+3 dB, -6 dB): 64 Hz – 30 kHz
Nominal Impedance: 6 Ω
Minimum Impedance: 4 Ω
Sensitivity (2.83 Vrms@1 m): 88 dB
Stereo Amplifier Power: 25 - 75w
AV Receiver (2 ch. driven): 50 - 75w
Crossover Frequency: 2.4kHz
Effective Volume: 6.1 L (372 cu in)
Dimensions H/W/D: 278 x 170 x 282 mm (11.0 x 6.7 x 11.1 in)
Weight (per speaker): 10.59 lbs / (4.8 kg) per speaker
Q Acoustics 3030i
£389.00 pair
Finishes: White, Graphite, Black and Walnut
The Q Acoustics 3030i is the latest bookshelf or stand-mount addition to our award-winning 3000i loudspeaker range. Designed to deliver big, bass, hard-hitting yet beautifully poised sound from a compact, discreet and good-looking cabinet, it’s packed with Q Acoustics’ latest technological advances.
Key Features
Extraordinarily low 46Hz response for punchy, controlled bass
P2P computer-aided bracing eliminates cabinet-borne resonances for the cleanest, most accurate sound
Custom-designed stand for perfect placement, perfect isolation and perfect stability.
Specification
Enclosure type: 2-way reflex
Bass unit: 165 mm (6.5 in)
Treble unit: 22 mm (0.9 in)
Frequency response (+/-3 dB, -6 dB): 46 Hz - 30 kHz
Average impedance: 6 Ω
Minimum impedance: 4 Ω
Sensitivity (2.83v@1m): 88 dB
Stereo amplifier power: 25 - 75 W
AV receiver power (2 ch. driven): 50 - 145 W
Crossover frequency: 2.4 kHz
Effective volume: 12.5 L (763 cu in)
Enclosure dimensions (HxWxD): 320x200x313
Overall dimensions (HxWxD): 325x200x329
Weight (per speaker): 6.4 kg (14.1 lbs)
Q Acoustics 3050i
£749.00 pair
Finishes: White, Graphite, Black and Walnut
The all new, Q 3050i floorstanding speaker has been created using design principles taken from our critically acclaimed Concept 500 Series, resulting in stunning sonic performance and beautiful aesthetics.
Key Features
Striking floorstanding Speakers with twin 165mm and 22mm precision drivers
The Q 3050i cabinet uses Point-to-Point (P2PTM) bracing techniques to reduce intrusive cabinet vibrations for a purer sound
HPE™ technology eliminates sympathetic resonance within the enclosures by equalising air pressure within the 3050i cabinet
Conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts
Uses a 22mm decoupled High Frequency Driver with wide surround creating a wide even dispersion of stereo.
Specification
Enclosure type: 2-way reflex
Bass Unit: 2 x 165 mm ( 6.5 in)
Treble Unit: 22 mm (0.9 in)
Frequency Response (+3 dB, -6 dB): 44 Hz – 30 kHz
Average Impedance: 6 Ohm
Minimum Impedance: 4 Ohm
Sensitivity (2.83 V@1 m): 91 dB
Stereo Amplifier: 25 - 100 W
AV Receiver (2 ch. driven): 50 - 165 W
Internal Amplifier Power: -
Crossover Frequency: 2.5 Hz
Effective Volume: 32.4 L (1977 cu in)
Dimensions H/D/W mm: 1020 x 310 x 320 (210mm without stabilizers) mm
Enclosure width: 200mm (7.9 in)
Weight (per speaker): 17.8 kg (39.2 lbs)
Q Acoustics 5010
£499.00 pair
Finishes: White, Graphite, Black and Walnut
Small enough to keep a low profile, but with sound big and accomplished enough to draw attention to itself. If you want off-the-scale performance from a discreet, compact and easy-to-position loudspeaker, the 5010 bookshelf speaker fits the bill as nicely as it fits your space.
KEY FEATURES
C3 Continuous Curved ConeTM design in the mid/bass driver ensures smoother high-frequency integration with the tweeter and superior bass dynamics.
Sophisticated, clean and contemporary design with dark acrylic baffle motif mirrors the minimalist C3 Continuous Curved ConeTM profile.
Available in four stylish finishes: Satin Black,Satin White, Santos Rosewood and Holme Oak.
With a design taken from the Concept series but in a new housing, the high-frequency driver is fully hermetically sealed and mechanically isolated from the front baffle to protect from internal cabinet pressure and resonances from the mid/bass driver.
Ground-up mid/bass driver design delivers increased power handling.
Point-2-PointTM (P2P) internal bracing stiffens the cabinet to minimise lower frequency vibrations, while focusing stereo imaging and improving soundstage.
SPECIFICATION
Bass unit 1 x 110 mm (4.5 in)
Treble unit1 x 25 mm (1.0 in)
Frequency response(-6dB) 56Hz - 30 kHz
Nominal impedance 6 Ω
Minimum impedance 3.3 Ω
Sensitivity (2.83V @ 1kHz) 86.3 dB/w/m
Recommended amplifier power 15-90 W
Crossover frequency 2.5 kHz
Effective volume 5.0 L
Dimensions (per loudspeaker / HxWxD)264 x 160 x 263 mm (10.4 x 6.3 x 10.4 in)
Weight (per loudspeaker) 5.6 kg (12.3 lbs)
Q Acoustics 5020
£599.00 pair
Finishes: White, Graphite, Black and Walnut
Experience all the scale and power of your favourite music without letting your loudspeaker dominate your room. The 5020 standmount speaker will put your right in the heart of the music without putting itself at the heart of your space.
KEY FEATURES
C3 Continuous Curved ConeTM design in the mid/bass driver ensures smoother high-frequency integration with the tweeter and superior bass dynamics.
Sophisticated, clean and contemporary design with dark acrylic baffle motif mirrors the minimalist C3 Continuous Curved ConeTM profile.
Available in four stylish finishes: Satin Black,Satin White, Santos Rosewood and Holme Oak.
With a design taken from the Concept series but in a new housing, the high-frequency driver is fully hermetically sealed and mechanically isolated from the front baffle to protect from internal cabinet pressure and resonances from the mid/bass driver.
Ground-up mid/bass driver design delivers increased power handling.
Point-2-PointTM (P2P) internal bracing stiffens the cabinet to minimise lower frequency vibrations, while focusing stereo imaging and improving soundstage.
SPECIFICATION
Bass unit1 x 125 mm (5.0 in)
Treble unit1 x 25 mm (1.0 in)
Frequency response(-6dB) 53 Hz - 30 kHz
Nominal impedance 6 Ω
Minimum impedance 3.3 Ω
Sensitivity (2.83V @ 1kHz) 87.9 dB/w/m
Recommended amplifier power25-100 W
Crossover frequency 2.5 kHz
Effective volume6.8 L
Dimensions (per loudspeaker / HxWxD)284 x 180 x 293 mm (11.2 x 7.1 x 11.5 in)
Weight (per loudspeaker) 7.0 kg (15.4 lbs)
Q Acoustics 5040
£999.00 pair
Finishes: White, Graphite, Black and Walnut
5040 is a notably compact floorstander with a modest footprint - which means it’s ideal for those environments where space is at a premium but the desire for full-scale audio excitement (as well a visual gratification) is strong.
KEY FEATURES
C3 Continuous Curved ConeTM design in the mid/bass driver ensures smoother high-frequency integration with the tweeter and superior bass dynamics.
Sophisticated, clean and contemporary design with dark acrylic baffle motif mirrors the minimalist C3 Continuous Curved ConeTM profile.
Arrives in four stylish finishes: Satin Black,Satin White, Santos Rosewood and Holme Oak.
With a design taken from the Concept series but in a new housing, the high-frequency driver is fully hermetically sealed and mechanically isolated from the front baffle to protect from internal cabinet pressure and resonances from the mid/bass driver.
Ground-up mid/bass driver design delivers increased power handling.
Point-2-PointTM (P2P) internal bracing stiffens the cabinet to minimise lower frequency vibrations, while focusing stereo imaging and improving soundstage.
Helmholtz Pressure Equalisers (HPETM) reduces internal pressure and standing waves.
SPECIFICATION
Bass unit2 x 125 mm (5.0 in)
Treble unit1 x 25 mm (1.0 in)
Frequency response(-6dB)39 Hz - 30 kHz
Nominal impedance 6 Ω
Minimum impedance3.0 Ω
Sensitivity (2.83V @ 1kHz) 91.5 dB/w/m
Recommended amplifier power25-150 W
Crossover frequency2.5 kHz
Effective volume27 L
Dimensions (per loudspeaker / HxWxD)Inc spikes and stabiliser: 967 x 361 x 293 mm (38.1 x 14.2 x 11.5 in)
Weight (per loudspeaker)18.0 kg (39.7 lbs)
Q Acoustics 5050
£1299.00 pair
Finishes: White, Graphite, Black and Walnut
Where sheer scale, widescreen sound-staging and complete audio-fidelity are concerned, the 5050 outperforms its nominal competition with ease. If you have a bigger space to fill with the most beautifully and accurately reproduced sound, the 5050 floorstander is the speaker you need. Supplied with magnetically fixed grilles.
KEY FEATURES
C3 Continuous Curved ConeTM design in the mid/bass driver ensures smoother high-frequency integration with the tweeter and superior bass dynamics.
Sophisticated, clean and contemporary design with dark acrylic baffle motif mirrors the minimalist C3 Continuous Curved ConeTM profile.
Arrives in four stylish finishes: Satin Black,Satin White, Santos Rosewood and Holme Oak.
With a design taken from the Concept series but in a new housing, the high-frequency driver is fully hermetically sealed and mechanically isolated from the front baffle to protect from internal cabinet pressure and resonances from the mid/bass driver.
Ground-up mid/bass driver design delivers increased power handling.
Point-2-PointTM (P2P) internal bracing stiffens the cabinet to minimise lower frequency vibrations, while focusing stereo imaging and improving soundstage.
Helmholtz Pressure Equalisers (HPETM) reduces internal pressure and standing waves.
SPECIFICATION
Bass unit2 x 150 mm (6.0 in)
Treble unit1 x 25 mm (1.0 in)
Frequency response(-6dB)37 Hz - 30 kHz
Nominal impedance6.0 Ω
Minimum impedance3.0 Ω
Sensitivity (2.83V @ 1kHz) 91.8 dB/w/m
Recommended amplifier power25-150 W
Crossover frequency2.7 kHz
Effective volume39.7 L
Dimensions (per loudspeaker / HxWxD)Inc spikes and stabiliser: 1017 x 366 x 336 mm (40.0 x 15.2 x 13.2 in)
Weight (per loudspeaker)21.6 kg (47.6 lbs)
Privacy Settings
You are welcome to change your privacy preferences here.
Our website uses functional cookies and external script to improve your experience in line with our Privacy Policy